Generator,Electrician, Annapolis, MD Generator
Written by Larry Cook

Key Considerations When Buying a Standby Generator – Part 2

As discussed in Part 1, you have made the decision to purchase a standby generator for your home or business to prevent problems caused by power outages. Part 2 will discuss Installation Team, Generator Location, Outdoor Enclosure, and Voltage Requirement. Consult with a reputable and experienced licensed electrician for your safety and the best results. 

Read More
Heavy-Up ,Repair ,Service
Written by Larry Cook

3 Old Electrical Panels that Should be Replaced

Failures of electrical panels can result in dangerous electrical arcing between the circuit breaker and buss bar or from a circuit breaker’s failure to trip because of an overload. Either can lead to a build up of high temperatures and eventually a fire.

Many houses that were constructed from 1950 to 1980 typically had one of the following three brands of electrical panels: ITE Pushmatic, Zinsco and the most notorious, Federal Pacific Electric. Call an experienced and licensed electrician if your home has one of these still installed and replace it with a modern model to protect your home and family. 

Read More
Annapolis, MD ,electrician, wiring and installations,
Written by Larry Cook

Take the Right Steps When Rewiring Your Home – Part 2

As discussed in Part 1, replacing and upgrading a home’s wiring is a big and costly project, but it is often necessary to ensure your family’s safety. Upgrading the wiring of your home may also be necessary because insurance carriers occasionally refuse to provide coverage or charge higher premiums. Part 2 will cover Warning Signs, Aluminum Wiring, and Increasing Capacity. 

Read More
electrician, heavy-up,electrical repair
Written by Larry Cook

Surge Protection for Commercial Facilities – Part 3

As discussed in Part 2, almost every enterprise must rely on modern electrical equipment in some way, and they can be degraded or damaged by power surges. Business continuity can be endangered without proper protection. Part 3 will cover Surge Suppression Devices, Selection, and Uninterruptible Power Supply. 

Read More
Electrician, Electrical services
Written by Larry Cook

Surge Protection for Commercial Facilities – Part 2

As discussed in Part 1, sudden electrical changes in a circuit, power or voltage surges are short bursts of energy that can damage electrical or electronic equipment. Part 2 will discuss Businesses and Equipment at Risk, Protections, and Minimizing Disruptions.

Businesses and Equipment at Risk

Almost every enterprise must rely on modern electrical equipment in some way, which can be degraded or damaged by surges. Business continuity can be endangered without having proper protection. Companies that have electronic systems in more dangerous locations, dependent on substandard local utilities, or located in areas where lightning strikes are frequent, will be more vulnerable to the harmful effects of power surges.

Protections

Businesses large and small should acknowledge the risk of power surges and the advantages of surge protection. The specific requirements of each company should also be considered. Consulting with licensed electricians who are experienced and expert in installing surge protection solutions, will garner the best results. Below are several best practices for facilities.

  • Ensure systems share a common ground and have entry to the facility a few feet from one another.
  • Install surge protection at distribution panels as safeguards from surges generated by high-powered motors, welding equipment, etc.
  • Low voltage and communications lines should be installed away from power cables and at right angles.
  • Sensitive equipment and communications lines should have surge protection.
  • Surge protection should be installed to shield systems from external power sources.

Minimize Power Disruptions

Another best practice is minimizing power disruptions. Every facility’s electrical system requires proper grounding as set forth by the NEC (National Electrical Code). Every cable, satellite, and telephone wire must be connected to the identical grounding point. Structured cabling must be located at a proper distance away from power cables that can generate surges. Telecommunications areas require wiring that minimizes electromagnetic disturbances and electrical surges.

Part 3 will cover Surge Suppression Devices, Selection, and Uninterruptible Power Supply.

Electrical Peace of Mind

Providing professional electricians since 1988 in Maryland, Cook Electric is the company you can rely on for all your electrical service needs. For knowledgeable, fair, honest, reliable, and conscientious service, call Cook Electric today at (410) 266-9040. We will be very glad to help you.

 

electrician, electrical services needs
Written by Larry Cook

Surge Protection for Commercial Facilities – Part 1

Resulting from sudden electrical changes in a circuit, power or voltage surges are short bursts of energy that occur in electrical or electronic equipment. Typically lasting just a millisecond, a power surge can increase the voltage within electronic circuits from hundreds to thousands of volts. They are one of the most common hazards to sensitive electronic equipment. A study found that power surges are the cause of more than $25 billion annually in costs from down time, repair, and replacement. 

Read More
electrician,Annapolis, MD,Residential
Written by Stu Kushner

Prepare Your New Smart Home with Good Wiring

If your new home is in the construction phase, it will probably get wired for home automation during the process. However, this must be done properly to save headaches and more expenses down the line. Good planning during construction will save time and effort in the future, as illustrated by the examples below. Work with an experienced and licensed electrical contractor for the best results. 

Read More
electrician, electrical service needs
Written by Larry Cook

Lighting Concepts to Aid the Physically Challenged

Providing care for those with disabilities can be challenging. Well-designed lighting can create a home environment that is safer and more accessible. The following are several concepts regarding lighting that supports this notion. Consult with a licensed electrician regarding installation for safety.

Accessible Light Switches

Light switches that are hard to reach are a common problem for people who are physically challenged. Typically, light switches are installed too high for those in wheelchairs. Light switches are also located at the rear of counters, preventing access. Principles of universal design advise that light switches be installed at a height of 36 to 44 inches and not at the rear of counters. 

Read More
Electrical services, electrician, Annapolis
Written by Larry Cook

Commercial Electrical Services to Energize Your Business

If you need an expert and experienced commercial electrical services in the Annapolis area, Cook Electric is the right choice for your business. Whether you own a gallery, restaurant, commercial facility, store, office, or warehouse, we will be there for you.

Any time your business is remodeling, installing new technology, or upgrading its electrical system, the licensed commercial electricians of Cook Electric can do the job for your organization. 

Read More
electrical standards,electricians, Maryland
Written by Larry Cook

NEC 2017 Code Updates for GFCIs – Part 2

As mentioned in Part 1, GFCI requirements have been updated in the NEC 2017 edition. Changes to NEC code regarding GFCIs have been included with every new release since 1971. Part 2 will discuss GFCI protection for areas Other Than Dwelling Units and Miscellaneous. Remember to call an experienced and licensed electrician for all home electrical projects for your safety and the best results. 

Read More
1 2 3 12